China Epoxy Coated Wire Mesh Manufacturer

The production of epoxy resin coated screen is mainly divided into the following steps:

1. Purchase wire mesh and epoxy resin: choose the appropriate wire mesh and epoxy resin, generally choose a wire mesh with a diameter of 0.1mm-0.5mm, and choose a suitable model for the epoxy resin.

2. Coating preparation: clean the screen, wipe off the moisture, and then apply a layer of primer, and wait for the primer to dry completely.

3. Epoxy resin coating: Mix the epoxy resin evenly according to the proportion, and then apply it evenly on the primer with a coater or a scraper, and be careful not to apply it too thickly.

4. Curing: put the resin-coated screen into a constant temperature and humidity box, and cure according to the specified time and temperature.

In terms of application, epoxy resin coated screen can be used in printing, filtering, screening and other fields, and has good wear resistance, corrosion resistance and high temperature resistance. However, it should be noted that the screen needs to be protected during use to avoid abrasion, scratches or damage, which will affect the service life.