Home » News » Epoxy Coated Mesh

Epoxy Coated Mesh

Views: 4     Author: Site Editor     Publish Time: 2022-09-22      Origin: Site

After epoxy coating ,the mesh is square without deformation and the surface is flat with the maximum undulating height on the platform ≤10mm. The powder coating amount is controlled at 20-35g/m2 , with moderate interleaving points . The width of finished product can reach to 1600mm.

The surface treatment powder adopts low temperature fast curing oil-resistant matting resin paint (160°C/90s).The powder has obtained RoHS and REACH certification .

Epoxy Coated Mesh is resistant to oil immersion and corrosion . Epoxy Coated Mesh can pass the detection of various brands of hydraulic oil around the world at different temperatures and times , The coating surface has no change , Epoxy Coated Mesh is suitable for special hydraulic filter products of high temperature and high pressure .

Weather corrosion resistance ,according to ASTM B117-09  salt spray test standard ,continuous test 96H coating surface unchanged ,suitable for use in harsh environment air filter and outdoor environment .

Strong adhesion , can pass H grade pencil test ,1kg/50cm impact test , scratch test, anti-fatigue test .

High bending resistance ,can be folded through a steel rod with a radius of curvature of 1mm, no cracks on the surface

Epoxy Coated Mesh

Related Products

content is empty!

Factory Address:150m West Of YinWang Road, Old Industrila
Area, Anping,Hebei,China
E-mail:  admin@milesen.cneverichmetals1999@vip.163.com            
Leave a Message
Contact us
Copyright  2019-2020 Anping Milesen Metal Net Products Co., Ltd.  | All Rights Reserved  Power by Ycheer