Stainless steel wire mesh precision of different grades

The precision of stainless steel wire mesh can be divided into 3 levels

The inspection accuracy of stainless steel wire mesh accuracy is divided into 3 levels:

Detecting the deviation of mesh size is an important basis for distinguishing accuracy.

The first level of accuracy, mesh deviation can not exceed 6%;

Second level accuracy, mesh deviation does not exceed 9%;

Third level accuracy, mesh deviation does not exceed 12%; .

The main application scenarios of high-precision stainless steel wire mesh: hospital, pasta, meat barbecue, daily life with flower basket, fruit basket series are mainly made of stainless steel mesh, the surface is treated by electrolytic polishing technology, and the surface is smooth and clean as a mirror.

The main defects of some stainless steel wire mesh mainly refer to: the warp and weft are not firmly interwoven, the fingers of both hands rub up and down, the warp and weft lines have obvious loosening displacement, the rolling edge is serious, the mesh hole is greater than or equal to 0.18mm, and the 1m long mesh surface natural curling diameter is less than 80mm; If the opening of the mesh is less than 0.18mm, and the natural bending diameter of the 1m long mesh is less than 60mm, it should be judged as unqualified.

The inspection accuracy of stainless steel wire mesh weaving accuracy is divided into 3 levels

Application of stainless steel wire mesh: hospital, pasta, meat barbecue, flower basket and fruit basket series for daily life are mainly made of stainless steel mesh, and the surface is treated by electrolytic polishing technology, and the surface is as bright as a mirror.

The inspection accuracy of weaving accuracy is divided into 3 levels: the first-level accuracy, the mesh deviation cannot exceed 6%; the second-level accuracy does not exceed 9%; the third-level accuracy does not exceed 12%; Inspection of mesh size.

Major defect categories Major defects mainly refer to: warp and weft interweaving is not firm, rubbing up and down with fingers of both hands, warp and weft threads have obvious loosening and displacement, serious curling, mesh opening is greater than or equal to 0.18mm, and the natural curl diameter of 1m long mesh surface is less than 80mm; If the mesh opening is less than 0.18mm, and the natural bending diameter of the 1m long mesh surface is less than 60mm, it should be judged as unqualified.