Stainless Steel Woven Mesh

An important application area of stainless steel woven mesh, is petrochemical industry, this kind of stainless steel woven mesh is high quality standard item, that is very critical to grantee raw material alloy content, mesh micron accuracy and broken wire or double wire elimination. Screen are an integral part of most downhole sand control strategies. Based on pores, there are Pre-Packed Screen, Shrouded Metal Mesh Screen and Expandable Screen. Sand Control Screens are mechanical filtration or retention devices to:Provide sand retention of the gravel pack and or formatio sand.Allow passage of fluids during well clean up,production or any stimulation activities, products covered: Wire Wrap Screens, Pre-Pack Screens and Metal Mesh Screens.

We perform the following tests and/or inspections listed below on woven mesh.

Light table inspection. A 100% surface area light table inspection shall be performed based on ASTM E 2016-15 and ISO 17824 standard.

Aperture testing. Glass bead testing shall be performed, once per master roll. The test procedure shall be performed if customer has this customized requirement.

Stainless steel mesh developed in 1980s.

Consists of base pipe,layered filtration jacket and outer shroud.

Less demage occurs during installation.

Corrosion resistence of stainless steel mesh

Normal spec. of the mesh are square mesh like 10mesh ,18mesh ,20mesh which are the main supporting layer and 125um ,175um ,250um and 300um of the Dutch Weave Mesh are the standard filtration media.