Views: 2 Author: Site Editor Publish Time: 2020-10-27 Origin: Site
To make stainless steel mesh with smooth and shiny surface ,we advises:
1. The surface of the stainless steel mesh belt must be cleaned and brushed frequently to remove the appendages and remove the external factors that cause rust.
2. When cleaning your stainless steel mesh belt, be careful and apply tools that have never been abrasive. Neither the soft cloth nor the bakelite will damage the stainless steel mesh belt.
3. Some stainless steel mesh belts have grinding lines or textures on the outside. If there is a crushing line, it must be sized according to the same orientation as the polishing line. If the texture is not clear, you must be careful at this moment and wipe it with a soft cloth or plastic pad.
4. Use alkaline, alkali chloride or bleach-free detergents, mouthwash stainless steel mesh belts, and avoid the use of chloride-containing detergents, which may cause small pits. Or rust. Once you have taken the detergent containing bleach, you must develop the stainless steel mesh belt as soon as possible, develop it, and then print, and immediately wipe the large surface of the stainless steel mesh belt clean. Especially for suspended water containing detergent, the faster the stainless steel mesh belt is dry, the better. The stainless steel mesh belt is air-dried after drying because oxygen can protect the passive film of the stainless steel mesh belt.
Factory Address: 150m West of YinWang Road，Old Industrial Area，Anping, Hengshui, China, zip053600
Mobile of Sales Director: +86-13903189134
Mobile of COO: +86-15512988999