The main mesh and partial mesh of stainless steel wire mesh

The main mesh and partial mesh of stainless steel wire mesh

1. Orthodox stainless steel wire mesh: Stainless steel wire mesh with the same number of warp and weft meshes and the same thickness of warp and weft wire diameters. Zhengmu stainless steel wire mesh has high processing costs and strict quality requirements, and is generally used for export or precision instruments

Example: 10-mesh stainless steel wire mesh with a wire diameter of 0.6 mm, that is, there are 10 wires in the top, bottom, left, and right sides of a 25.4 mm square, and the wire diameter is 0.6 mm.

2. Off-mesh stainless steel wire mesh: Stainless steel wire mesh with different numbers of warp and weft meshes and different diameters of warp and weft wires. Partial mesh stainless steel wire mesh has low processing cost and less strict product requirements, and is generally used for filtering

Example: 10-mesh stainless steel wire mesh with a wire diameter of 0.6 mm, that is, there are about 10 wires up and down in a 25.4 mm square, and maybe 9 wires. The left and right wire diameters are 0.6 mm, and the top and bottom may be 0.58 mm in diameter and so on.

This is also one of the reasons for the price difference, users need to pay attention.