APPLICATION

Hydraulic and Air Filter

We set 40 sets plain steel mesh weaving looms in site, mesh opening accuracy, warp and weft wire straightness, mesh defects control, dimension control efficiently grantee raw mesh quality; Epoxy power has different brands, we normally choose anti oil power for industrial use; and anti corrosion for civil use.

We equipped with simple performance simulation laboratory. The test includes Salt Spray, Pencil Hardness Test, Paint Film Impact Test, They are used in the epoxy powder incoming inspection, product process quality inspection, and new products development inspection.

Sand Control Screen

We perform the following tests and/or inspections listed below on woven mesh.
Light table inspection. A 100% surface area light table inspection shall be performed based on ASTM E 2016-15 and ISO 17824 standard.
Aperture testing. Glass bead testing shall be performed, once per master roll. The test procedure shall be performed if customer has this customized requirement.
Stainless steel mesh developed in 1980s.
Consists of base pipe,layered filtration jacket and outer shroud.
Less demage occurs during installation.
Corrosion resistence of stainless steel mesh.

Vertical Leaf Filter
Stainless Steel wire mesh owns a typical charateristic is anti strong acid and corrosion;and plays a vital performance in typical area and industries.Stainless steel woven mesh is a indispensible part of pressure leaf filters:
There are two types of filters classified according to shell design:
· Horizontal Pressure Leaf filters
· Vertical Pressure Leaf Filters
Filtered cake can be discharged as dry or wet cake: For cake drying dry steam or hot air is used. For wet cake discharge additional spray nozzles are provided. Pressure leaf filters finds wide applications in different industries such as edible oil, food, pharmaceuticals, chemicals & fine chemicals.
Screen Changers

Stainless steel wire mesh ,galvanized wire mesh and plain steel wire mesh ,the major application is plastic and rubber filtration. Extruder screen is an important part in the melt filtration and extrusion process.

Our extruder screens are made of steel, stainless steel, galvanized wire and brass wire mesh. It can be single or multi-layers wire mesh. Multi-layers extruder screens are fastened by spot welding or with aluminum frame. Besides, its shapes can be various including circle, disc, oval, rectangular, cones and other special shape.

CONTACT US

China Address: 150m West of YinWang Road,Old Industrial Area,Anping, Hengshui, China, zip053600

E-maileverichmetals1999@vip.163.com

E-mail: admin@milesen.cn
Mobile of Sales Director: +86-13903189134
Mobile of COO: +86-15512988999
Website: http://www.milesenwiremesh.com
http://www.stainlesssteelwiremesh.cn

We obtained Certificate of GB/T19001-2016 /ISO9001:2015;ISO Registered #:06718Q20463R0M and some customized certificates like stainless steel wire mesh salt spray test and Rohs Directive Test Reports,White House Micron Test Report,MSDS Certificate; etc.

Copyright  2019-2020 Anping Milesen Metal Net Products Co., Ltd.  | All Rights Reserved  Power by Ycheer