Views: 0 Author: Site Editor Publish Time: 2026-04-21 Origin: Site
Grade 304 stainless steel wire mesh is the most widely used type due to its excellent corrosion resistance, formability, and cost effectiveness. Sourcing from china 304 stainless steel wire mesh suppliers can yield significant savings, but quality consistency varies. This article outlines the key specifications, supplier evaluation criteria, and common pitfalls to avoid when purchasing 304 mesh from China.
304 stainless steel contains 18–20% chromium and 8–10.5% nickel. This composition provides a stable passive layer that resists oxidation in most atmospheric and mild chemical environments. Typical applications include:
Food processing sieves
Water filtration screens
Machine guards and safety barriers
Insect screens and ventilation meshes
Architectural cladding
When requesting quotes from china 304 stainless steel wire mesh suppliers, provide the following:
| Parameter | Example | Notes |
|---|---|---|
| Mesh count | 40×40, 100×100, 200×200 | Openings per linear inch |
| Wire diameter | 0.25 mm, 0.0635 mm | Affects strength and open area |
| Weave type | Plain, twill, Dutch | Plain is most common for 304 |
| Roll width | 1 m, 1.2 m, 1.5 m | Custom widths possible |
| Length | 30 m, 50 m, or cut pieces | |
| Surface finish | Mill finish, electro‑polished | For cleanliness or aesthetic needs |
Reliable china 304 stainless steel wire mesh suppliers will provide:
Material certificate showing Cr, Ni, C, Si, Mn, P, S levels.
Dimensional report listing measured mesh count and wire diameter across the roll.
Visual inspection for weave defects, broken wires, or inconsistent openings.
Packaging details – moisture‑proof wrapping to prevent rust during sea freight.
Rust spots on “304” mesh – This usually indicates low nickel content or contamination from carbon steel brushes during finishing. Solution: specify “304 certified with MTR” and perform a salt spray test on a sample.
Inconsistent opening sizes – Caused by uneven wire tension. Request a sample and measure 10 random openings with a calibrated magnifier.
Shorter roll lengths – Some suppliers may under‑deliver. Specify “net weight” or “exact length” in the contract and have a third‑party inspection at loading.
The wire diameter directly affects open area. For example, a 100 mesh cloth with 0.10 mm wire has an opening of 154 μm and 45% open area. With 0.15 mm wire, the opening shrinks to 104 μm and open area drops to 27%. Always confirm both mesh count and wire diameter to ensure the mesh performs as expected.
Q1: Can I use 304 mesh for saltwater applications?
A: 304 has limited resistance to chlorides. For continuous seawater exposure, 316 stainless steel is recommended. However, 304 is acceptable for occasional splash or freshwater.
Q2: What is the temperature limit for 304 wire mesh?
A: Intermittent service up to 870°C, continuous service around 550°C. Above this, scaling and loss of strength occur.
Q3: How do I verify that a supplier is a genuine manufacturer, not a trader?
A: Ask for factory photos, request a video call to see the weaving looms, and check their business license. Many genuine china 304 stainless steel wire mesh suppliers are happy to provide these.
Selecting the right china 304 stainless steel wire mesh suppliers involves verifying material grade, dimensional accuracy, and packaging quality. By specifying exact parameters and requesting samples, you can source reliable 304 mesh for a wide range of industrial applications. Anping Milesen Metal Net Products Co., Ltd. supplies certified 304 wire mesh with transparent documentation and flexible order quantities.
