We set 40 sets plain steel mesh weaving looms in site, mesh opening accuracy, warp and weft wire straightness, mesh defects control, dimension control efficiently grantee raw mesh quality; Epoxy power has different brands, we normally choose anti oil power for industrial use; and anti corrosion for civil use.
We equipped with simple performance simulation laboratory. The test includes Salt Spray, Pencil Hardness Test, Paint Film Impact Test, They are used in the epoxy powder incoming inspection, product process quality inspection, and new products development inspection.
The hydrogen production nickel mesh is an important part of the catalytic electrode of the alkaline electrolyzer. Alkaline electrolyzers are the current development hotspot in the hydrogen energy industry.
The catalytic electrode is made by spraying catalysts such as Raney nickel on the surface of a nickel mesh. In the electrolysis of water to produce hydrogen, catalytic electrodes are used to guide current through the electrolyte to produce hydrogen and oxygen. Nickel mesh has the characteristics of good electrical conductivity, corrosion resistance and mechanical strength. It is widely used in fields such as electrolysis of water for hydrogen production and fuel cells.
We perform the following tests and/or inspections listed below on woven mesh. Light table inspection. A 100% surface area light table inspection shall be performed based on ASTM E 2016-15 and ISO 17824 standard. Aperture testing. Glass bead testing shall be performed, once per master roll. The test procedure shall be performed if customer has this customized requirement. Stainless steel mesh developed in 1980s. Consists of base pipe,layered filtration jacket and outer shroud. Less demage occurs during installation. Corrosion resistence of stainless steel mesh.
Stainless steel wire mesh, galvanized wire mesh and ordinary steel wire mesh are mainly used for plastic and rubber filtration. Extruder screens are an important part of the melt filtration and extrusion process.
Our extruder screens are made of steel, stainless steel, galvanized wire and brass wire mesh. It can be single or multi-layer wire mesh. Multi-layer extruder screens are fixed by spot welding or aluminum frames. In addition, they come in a variety of shapes, including circles, disks, ovals, rectangles, cones and other special shapes.
